ENGINES 

ENGINES

There are 48 products.

Subcategories

Engine Management

Engine Management

Throttle Bodies

Throttle Bodies

Fuel Pumps

Fuel Pumps

Vauxhall Engine Parts

Vauxhall Engine Parts

Honda S2000 and K20...

Honda S2000 and K20 Engine Parts

Toyota AE86 Engine Parts

Toyota AE86 Engine Parts

Oil coolers and...

Oil coolers and accessories

per page

The OMEM200 Ignition Management System is a high performance, easy to install, easy to map system designed specifically for the serious Clubman competitor.

The OMEM600 Engine Management System is a high performance, easy to install, easy to map system with all of the features now demanded in motorsport.

The OMEM710 Engine Management System is an ultra high performance ECU system designed specifically for high end users who require the absolute best at an excellent price for their engines. With up to 6 ignition outputs and up to 12 fuel outputs the OMEM710 is suitable for up to 12 cylinder engines.

Protect your engine At a user definable engine speed, a selectable soft or hard ignition cut rev limit reduces engine power safely to limit the engine speed, protecting your engine from damage caused by over-revving.

A highly accurate shift light with a single remotely mounted ultra-bright 3000mcd brightness 10mm bezelled LED. The engine speed at which the LED lights is user definable and can be set in increments of 100rpm.

A shift light with a small (40x16x13mm) remote LED module incorporating four 5mm incrementally lighting LED’s of 350mcd brightness (each). Both the final shift point and the increments between LEDs are user definable to suit the driver’s needs.

Combining a high performance soft-cut rev limiter and a single remotely mounted 10mm LED shift light. The Speed System provides a complete solution in one unit.

Built by Omex engineers using some of the same materials as found in race series all the way up to F1.

Built to a specification found in premium modern road cars, even up to supercar status, this is a great harness for a road car or trackday car.

For those with good electrical experience who wish to build their own wiring harness to match the specific dimensions of their vehicle.

Built by Omex engineers using some of the same materials as found in race series all the way up to F1.

Built to a specification found in premium modern road cars, even up to supercar status, this is a great harness for a road car or trackday car.

For those with good electrical experience who wish to build their own wiring harness to match the specific dimensions of their vehicle.

Built by Omex engineers using some of the same materials as found in race series all the way up to F1 Save

Built by Omex engineers using some of the same materials as found in race series all the way up to F1

The semi loom comes completed with all of the ‘normal’ engine running cables. Auxiliary functions such as full throttle gearshift, idle valve control etc will require an auxiliary wire pack

For those with good electrical experience who wish to build their own wiring harness to match the specific dimensions of their vehicle.

Manifold Pressure Sensor (MAP)

Manifold Pressure Sensor (MAP)

Coolant Temperature Sensor Thread M12 x 1.5

Air Temperature Sensor Thread M10 x 1.25

Lambda Sensor Boss and bung

Toothed crank wheel 31-1 teeth. Machined steel, 140mm diameter, 5mm thick, 20mm pilot hole

Toothed crank wheel 31-1 teeth. Machined steel, 100mm diameter, 5mm thick, 20mm pilot hole

Showing 25 - 48 of 48 items